Drawing of a silicone cartridge with a long nozzle — **FX-6300** Sanitary silicone, 310 mlColour **White**Section 6Drawing, not to scale

FX-6300-WHSealants and tape

Sanitary silicone, 310 ml

Mould resistant silicone for baths, showers and sinks. Fits a standard sealant gun.

$7.90Tax included. Trade account holders pay about 15 percent less.

Colour White

In stock, 48 at Mill Road

DeliveryOrder by 15:00 for the next working day. $6.50, free over $75.
CollectFree from 3 Mill Road, ready one hour after you order.
ReturnsWithin 30 days if unused. Cut lengths of pipe cannot be returned.

Specification

Volume	310 ml
Colour	White
Skin time	About 15 minutes
Full cure	24 hours
Use	Baths, showers, sinks, tiles
SKU	FX-6300-WH

Fitting notes

Cut the nozzle at 45 degrees, a little smaller than the gap. Fill the bath with water before you seal it, so the joint does not crack when someone gets in.

Not sure it is the right part? Call the counter on +00 000 000 000 or bring the old one in.

Usually bought with

2 partsBought together most often

Drawing of a roll of masking tape with the end pulled out

FX-7300

Masking tape, 50 m

25, 38 or 50 mm

In stock from $3.20

Drawing of a white 40 mm waste pipe with a socket on one end

FX-1040

40 mm waste pipe, white

1, 2 or 3 m lengths

In stock from $6.50